HomeMamod Steam Engines Spares and Parts:
Mamod Spares and Parts Produced by Mamod Ltd and Independent Manufacturers in the UK.
Outstanding Customer Service
- Free Mamod engines technical advice from the Mamod Guru.
- Help in gettting Mamod steam engines running properly.
- Independent seller of Mamod spares.
- Spares for Mamod engines.
- Established 2004.
- You've got our phone number! 0777 552 1452
Don't miss out - be sure to visit pages 1 & 2 for all Mamod spares.
- per page
For Mamod Engines wirth Sight Glass secured with RIVETS.
Click pic for more info.
For engines that have a Sight Glass secured with SCREWS.
Click pic for more info.
Mamod Fuel Tray Without Heat Protection
Suitable for solid tablets and liquid gel.
Genuine Mamod Traction Engine Tyres
Amazing enhancement for your Mamod TE1A Traction Engine with our premium rubber tyres.
GENUINE MAMOD TRAILER TYRES SET
If you want a nice-to-look-at, quiet and smooth running Trailer, then this is your deal of the day!
Mamod Flywheel for SA1 Roadster
ROADSTER SA1
This is made for the SA1 vehicle.
DIMENSIONS: OD 1.89 INS/ ID 0.185 INS
Black Flywheel for Mamod SA1 Car variants
This is made for the SA1 type vehicles such as the darker coloured Limousine.
Back Wheel Pulley for Roadster
Back axle pulley for SA1 and derivatives.
Mamod SA1 Windscreen Frame
Designed to go on the Limousine Only
Mamod TE1/TE1A/SR1A Flywheel
This is the Standard Flywheel sold by Mamod today for all of their engines (except SW1/SP4/SP5/SE3).
DIMENSIONS: OD 53.50mm/ ID 4.70mm
For Mamod Whistle Assembly
Great product suitable for all Mamod engines.
Mamod SA1 Roadster Steering Rack
The perfect answer to "loose" steering.
For: Mamod Engine TE1 Traction Engine Canopy Bracket
This support wire is made by our specialist supplier.
Mamod Canopy Bracket
Not suitable for the TE1 engine. This one fits into the slots in the Fire Box.
Screws/nuts/washers included.
Mamod SA1 Road Wheel w/ fixing screw
Brass slot screw for easy fixing
Mamod Road Wheel Roadster
This one has NO fixing screw
Mamod SP4 / SP5 and the old SE3 engine.
A brass screw attaches this big boy flywheel to the crankshaft.
Mamod Balance Wheel Set
The balance wheel sits just below the red fllywheel.
It has its own axle and two Hub Caps which are included in the price.
MAMOD BURNER RAY
FOR SP2 SP3 SP4 ENGINE.
GEL & SOLID FUEL
See detailed description.
MECCANO / SP3 ENGINE / WS1 workshop line shaft pulley.
This is the best we can do to provide you with a new flywheel .........
Read on....................
TRACTION ENGINE TE1A/ STEAM ROLLER SR1/ STEAM WAGON SW1
Do you realise this part of your engine is exactly where people look first? That is because we humans take in any scene from the top down. So, it makes a lot of natural sense to make sure your chimney looks as good as it can.........................
MAMOD SE1/SE1A/SE2/SE3/SP4/SP5 PISTON-CYLINDER
SUPPLIED BY MAMOD LTD
NOT FOR SE2A.
PLEASE READ THE DETAILS BEFORE ORDERING.
MAMOD STEERING ROD
FOR FORKS MADE PRE 2020
TRACTION ENGINE / STEAM WAGON/
and any year STEAM ROLLER
MAMOD STEERING ROD
FOR FORKS MADE 2020 ONWARDS
TRACTION ENGINE / STEAM WAGON
ROADSTER ETC. SA1/
This Freshly pressed Engine Cowl will be bought by the real model engineers amongst you! Absolutely not for beginners with just a screwdriver..... unless you are going to borrow a drill, rivet gun and buy a few rivets too. And on the subject of rivets, the correct type for this Cowl are sold by Model Enthusiasts on a separate listing. But for the real adventurous enthusiasts rebuilding a model car etc., this is the item that will make your vehicle a head turner. Not sure? You just wait 'till you fit it........ "'scuse me mister, can I see your model?"........You see if I'm not right.
MAMOD STEAM ROLLER STEERING FORKS
This steering wheel with column is fitted to the SA1 range of vehicles. It is all very well made and will last in good condition for many many years. This type was introduced early 2020.
GENUINE MAMOD ROAD FRONT WHEELS + TYRES FITTED
PERFECT ENHANCEMENT
Easy fitting and a secure tight fit
We are making it possible for our customers to fit a brand new Mamod produced Engine Cowl for the Traction Engine / Steam Roller / Steam Wagon that requires no riveting!
Imagine, a screwdriver and fingers replacing the rivet gun and rivets.
Click the picture for more details.
ROADSTER ETC. SA1
If you are looking for a new (spray painted black) fire box for any of these, then you are in luck:
LIMOUSINE
FIRE ENGINE
STEAM WAGON
LONDON BUS
DELIVERY VAN.
Don't forget that you will need rivets and if you are feeling flush (who isn't!?) you really should buy a new chrome bonnet (engine cowl) if you are serious about impressing the birds.
The most often ordered of the Fireboxes. If you have need to renovate a TE1A, SR1A, SW1A then you are in the right place.
This Freshly pressed chrome finished Engine Cowl will be bought by the real model engineers amongst you! Absolutely not for beginners with just a screwdriver..... unless you are going to borrow a drill, rivet gun and buy a few rivets too.
THIS IS THE SHORTER OF THE TWO SIZES -
FOR THE STEAM ROLLER/ STEAM WAGON
See detailed description!
STEAM ROLLER SR1A
As part of your major renovation project, you will now need a new one of these. It will look so clean, tidy and new!
My engineer tells me that they are that tight. He always neatly removes the green paint area that is hidden by the smoke box. Then it has to be carefully tapped on with a piece of wood. And then, of course, drilled and riveted in place.
As part of your major renovation project, you will now need a new one of these. It will look so clean, tidy and new!
My engineer tells me that they are that tight. He always neatly removes the green paint area that is hidden by the smoke box. Then it has to be carefully tapped on with a piece of wood. And then of course drilled and riveted in place.
ROADSTER ETC. SA1:
If you are looking for a new Engine Face with all the pipes plus the forward and reverse lever for any of these, then you are in luck: STEAM ROADSTERS, LIMOUSINE, FIRE ENGINE, STEAM WAGON, LONDON BUS, DELIVERY VAN.
Genuine Mamod TE1A Road Wheels with Tyres
Suitable for TE1 and TE1A
MAMOD TRACTION ENGINE TE1A CANOPY
All ready to fit with its riveted-on Support Bracket.
(Not TE1)
FRESH FROM THE MAMOD FACTORY
Genuine Mamod Wheels and Tyre Set
For your Mamod engine improving project!
Supplied by Mamod Ltd from their Birmingham factory
The driving wheel tyre is grooved to take the TE1A drive band.
The METAL WHEELS and RUBBER TYRES.
- per page
