

|
Model Enthusiasts - MAMOD - SPARES & PARTS - Various
 |
Various |
 |
 See details
|
MAMOD CHASSIS RAILS AND AXLE MOUNT ASSEMBLY
SW1 "Just a minute Jim, I call you back, I've seen something on that Model Enthusiasts site that I haven't seen before............it's one of those chassis for a Steam Lorry like the one my mother-in-law trod on and knacked....... I'll have to get that..... see you later Jim"
Our Price: £34.99 |
 See details
|
MAMOD CRANKSHAFT 1/2 INCH PULLEY
SP4 and more: These things don't wear out - so you must have lost yours - or did you just buy an engine from eBay and it's missing? Officially, it's for an SP4 engine crankshaft but if it fits your crank - it's yours - for a small consideration of course.Dimensions: O.D. 0.500/0.394 inch I....
Our Price: £4.49 |
 See details
|
MAMOD FIRE ENGINE LADDER SUPPORT (WITHOUT THE BELL)
FIRE ENGINE FE1 "Yer..... I can see the picture Trev, but where does this bit fit then"It's a bit like being in the Masons, it's a bit of a mystery until you're on the inside. So let me tell you about the Ladder Support and put you on the inside track. This assembly of expensive brass, as ...
Our Price: £12.00 |
 See details
|
MAMOD LABELS - SELF ADHESIVE - STEAM WAGON
STEAM WAGON SW1 These quality self adhesive "transfers" were a little difficult to photograph and are not in fact curved as they appear here. See our "no-quibble" returns policy for peace of mind. Dimensions: 15.5 x 1.5cm. They are pealed from their backing strip and applied to a clean, dry su...
Our Price: £0.99 |
 See details
|
MAMOD PRESSURE GAUGE
This is a luxury but provides a feeling of safety -"hey love look here - - - - it's not going to blow up". Whatever you do, don't think about not using a safety valve! You can use this where the whistle screws in or another proper location. Don't think about fitting this to a mobile engine .........
Our Price: £64.80 |
 See details
|
MAMOD REVERSING LEVER
TRACTION ENGINE TE1A/ STEAM ROLLER SR1A/ STEAM WAGON SW1/ ROADSTER ETC. SA1 'Now didn't I tell you to go easy on the lever? Look at it..... you've ruined it.......all bent like that. Don't you go asking me to buy you another one!'' Note: You can buy a new one so cheap she'll never find out!
Our Price: £5.29 |
 See details
|
MAMOD SA1 CAR SEAT ASSEMBLY
ROADSTER SA1 Just like your car parked outside, Mamod seats wear out too! These beautiful new seats, frame and securing washers will transform your model into the comfortable vehicle you have always wanted.
Our Price: £15.29 |
 See details
|
MAMOD SELF ADHESIVE STICKERS - CANOPY - TRACTION ENGINE
These quality self adhesive were a little difficult to photograph and are brighter, longer and bolder than they appear here. They are self adhesive and pealed from their backing strip and applied to a clean, dry surface. But be careful, they stick immediately! They are applied to the sides of the...
Our Price: £0.99 |
 See details
|
MAMOD SP4 REVERSING LEVER
SP4 REVERING LEVER: Quite difficult to find anyone selling these little levers. This is the one currently being fitted to the SP4 engines now being made.
Our Price: £5.29 |
 See details
|
MAMOD TRAILER TOW BAR
When you buy a trailer for your Mamod mobile engine, you may find the kind seller forgot to mention there is no tow bar - BLAST! But being a resourceful kinda person you have been searching for one........ and that could be how you got here. Well, thank the Lord, we are trying to shift our st...
Our Price: £3.99 |
 See details
|
MAMOD WORKSHOP 1/2 INCH PULLEY - LINE SHAFT
THIS IS NOT FOR A STEAM ENGINE. IT IS MADE FOR THE WORKSHOP LINE SHAFT.
The only difference is the internal diameter which is a bit smaller than the other pulley we sell that is made to fit a crankshaft - primarily for the SP4 engine.
This one fits on the Workshop line shaft (there ...
Our Price: £4.49 |
 See details
|
PROPANE GAS REFILL ADAPTER
Connect this adapter to your propane canister you bought from the local hardware store, push the long tube into the propane tank on your engine and withdraw when this is filled (listen to the sound).
Like you used to do for your cigarette lighter.
Our Price: £15.86 |
 See details
|
PULLEY - BRASS - SA1 (car) and derivatives
This is the pulley that fits the SA1 and derivatives mobile engine.There is a short drive band (driving) that connects this pulley to the Flywheel of both engines. This 32mm diameter pulley has no screw fixing but is an interference fit onto the shaft. If it is not a tight fit you can use a...
Our Price: £9.27 |
 See details
|
PULLEY - TWO SPEED or TWIN BELT
A brass 2 speed or twin belt pulley for Mamod Stationary Engines
The smaller size is the same as the STANDARD MAMOD 1/2" & a larger 3/4" pulley.
it is 3/4"long (0.750) with a reamed 3/16" centre hole. Fixed with a grub screw.
Our Price: £5.99 |
 See details
|
WINDSCREEN FOR SA1L (LIMOUSINE)
ADMIT IT.... YOU'VE BEEN LOOKING FOR ONE OF THESE FOR FLIPPIN' AGES!"Do you know what Olive, you know that windscreen on my steam car....... you remember? The one you dropped the iron on when you had to run into the kitchen because you had to serve up my dinner and you hadn't realised it w...
Our Price: £16.00 |
|
|
|
|
|
|
 |
|
Copyright © 2004-2010 Model Enthusiasts |
|
|